commit 769cae

2026-01-28 20:08:32 Peter van Dijk: pinout as table

0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9

`miners/nebra outdoor.md` ..
@@ 9,16 9,20 @@

	Full pinout description (you can use [pinout.xyz](https://pinout.xyz/pinout/spi) instead of the second photo above):

-	* SX1262 MOSI, MISO and SCK to Nebra SPI0 MOSI, MISO and SCLK
-	* SX1262 DIO1 to Nebra GPIO22
-	* SX1262 BUSY to Nebra GPIO27
-	* SX1262 RST to Nebra GPIO17
-	* SX1262 NSS to Nebra GPIO24
-	* SX1262 3V3 to Nebra 3V3
-	* SX1262 GND to Nebra GND
-
-	There is a GND right next to GPIO17, and a 3V3 between GPIO22 and SPI0 MOSI.
-	If you use those two, all pins are in a single straight line except for the NSS one on GPIO24.
+	\| SX1262 pin \| Nebra/Pi GPIO number \| Nebra/Pi pin name \| Nebra/Pi pin number \|
+	\| -------- \| -------- \| -------- \| -------- \|
+	\| GND \| - \| Ground \| 9 or [some other ground pin](https://pinout.xyz/pinout/ground) \|
+	\| RST \| 17 \| GPIO 17 \| 11 \|
+	\| BUSY \| 27 \| GPIO 27 \| 13 \|
+	\| DIO1 \| 22 \| GPIO 22 \| 15 \|
+	\| 3V3 \| - \| 3v3 Power \| 17 or 1 \|
+	\| MOSI \| 10 \| SPI0 MOSI \| 19 \|
+	\| MISO \| 9 \| SPI0 MISO \| 21 \|
+	\| SCK \| 23 \| SPI0 SCLK \| 23 \|
+	\| NSS \| 24 \| GPIO 24 \| 18 \|
+
+	If you use 17 and 9 for 3V3 and GND, all pins are in a single straight line except for the NSS one on GPIO24.
+	SX1262 RF_SW, VIN, and pins like D5, D6, D7, do not need to be connected.

	# unsorted notes, to be sorted