commit d55654

2026-02-21 21:15:29 Peter van Dijk: note that USB works

0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9

`devices/bobber/bobcat miner 300.md` ..
@@ 32,8 32,8 @@
	\| GND \| GND \| 29 \| 30 \| SMB_CLK \| 3/24 (120) \|
	\| \| PETn0 \| 31 \| 32 \| SMB_DATA \| 3/23 (119) \|
	\| \| PETp0 \| 33 \| 34 \| GND \| GND \|
-	\| GND \| GND \| 35 \| 36 \| USB_D- \| \|
-	\| \| Reserved* \| 37 \| 38 \| USB_D+ \| \|
+	\| GND \| GND \| 35 \| 36 \| USB_D- \| USB_D- \|
+	\| \| Reserved* \| 37 \| 38 \| USB_D+ \| USB_D+ \|
	\| \| Reserved* \| 39 \| 40 \| GND \| GND \|
	\| \| Reserved* \| 41 \| 42 \| LED_WWAN# \| \|
	\| GND \| Reserved* \| 43 \| 44 \| LED_WLAN# \| 3/22 (118) \|
@@ 49,6 49,8 @@
	The pinout chosen here may not be the best.
	Because the bobcat puts SPI on different pins than other boards seen so far, we need to figure out if routing SPI to two sets of pins can create a miniPCIe board that works for the bobcat -and- for other devices.

+	USB might be the very simplest answer though.
+
	<details>
	<summary>diff against pymc_core revision ba3ff4c26b9fadda1995c1ef6e21c7f143768c8d (main branch as of 12 Jan 2026)</summary>