Bobcat Miner 300
Documentation below currently based on only observing the G295 model.
LoRa interface: SPI over mPCIe
Antenna connector: IPEX1
Software: a Debian image exists
'g3/3' means gpiochip 3, line 3.
Currently unclear which CS line is which of g3/1 and g3/2
this table needs a verification round
| Bobcat Miner 300 | Spec label | Top side | Bottom side | Spec label | Bobcat Miner 300 |
|---|---|---|---|---|---|
| 4/21 | WAKE# | 1 | 2 | 3.3V | |
| SCK g3/19 | Reserved**** | 3 | 4 | GND | GND |
| Reserved**** | 5 | 6 | 1.5V | MOSI g3/17 | |
CS (spidev5.0) on g3/1 or g3/2 |
CLKREQ# | 7 | 8 | VCC** | |
| GND | GND | 9 | 10 | I/O** | |
| REFCLK- | 11 | 12 | CLK** | ||
| REFCLK+ | 13 | 14 | RST** | ||
| GND | N/C or GND | 15 | 16 | VPP** | |
| key | key | ||||
CS (spidev5.1) on g3/2 or g3/1 |
Reserved | 17 | 18 | GND | GND |
| 4/19 | Reserved | 19 | 20 | Reserved*** | |
| GND | GND | 21 | 22 | PERST# | 4/22 |
| g3/3 | PERn0 | 23 | 24 | +3.3Vaux | |
| PERp0 | 25 | 26 | GND | GND | |
| GND | GND | 27 | 28 | +1.5V | |
| GND | GND | 29 | 30 | SMB_CLK | 3/24 |
| PETn0 | 31 | 32 | SMB_DATA | 3/23 | |
| PETp0 | 33 | 34 | GND | GND | |
| GND | GND | 35 | 36 | USB_D- | |
| Reserved* | 37 | 38 | USB_D+ | ||
| Reserved* | 39 | 40 | GND | GND | |
| Reserved* | 41 | 42 | LED_WWAN# | ||
| GND | Reserved* | 43 | 44 | LED_WLAN# | 3/22 |
| i2c 4/23 or 4/24 | Reserved* | 45 | 46 | LED_WPAN# | 3/29 |
| i2c 4/24 or 4/23 | Reserved* | 47 | 48 | +1.5V | 3/28 |
| Reserved* | 49 | 50 | GND | GND | |
| Reserved* | 51 | 52 | +3.3V |