Bobcat Miner 300
Documentation below currently based on only observing the G295 model.
LoRa interface: SPI over mPCIe
Antenna connector: IPEX1
Software: a Debian image exists
'3/5 (101)' means gpiochip 3, line 5, which is 101 in the global pin count.
Currently unclear which CS line is which of 3/1 and 3/2
this table needs a verification round
| Bobcat Miner 300 | Spec label | Top side | Bottom side | Spec label | Bobcat Miner 300 |
|---|---|---|---|---|---|
| 4/21 (149) | WAKE# | 1 | 2 | 3.3V | |
| SCK 3/19 (115) | Reserved**** | 3 | 4 | GND | GND |
| MISO 3/18 (114) | Reserved**** | 5 | 6 | 1.5V | MOSI 3/17 (113) |
CS (spidev5.0) on 3/1 (97) or 3/2 (98) |
CLKREQ# | 7 | 8 | VCC** | |
| GND | GND | 9 | 10 | I/O** | |
| REFCLK- | 11 | 12 | CLK** | ||
| REFCLK+ | 13 | 14 | RST** | ||
| GND | N/C or GND | 15 | 16 | VPP** | |
| key | key | ||||
CS (spidev5.1) on 3/2 (98) or 3/1 (97) |
Reserved | 17 | 18 | GND | GND |
| 4/19 (147) | Reserved | 19 | 20 | Reserved*** | |
| GND | GND | 21 | 22 | PERST# | 4/22 (150) |
| 3/3 (99) | PERn0 | 23 | 24 | +3.3Vaux | |
| PERp0 | 25 | 26 | GND | GND | |
| GND | GND | 27 | 28 | +1.5V | |
| GND | GND | 29 | 30 | SMB_CLK | 3/24 (120) |
| PETn0 | 31 | 32 | SMB_DATA | 3/23 (119) | |
| PETp0 | 33 | 34 | GND | GND | |
| GND | GND | 35 | 36 | USB_D- | |
| Reserved* | 37 | 38 | USB_D+ | ||
| Reserved* | 39 | 40 | GND | GND | |
| Reserved* | 41 | 42 | LED_WWAN# | ||
| GND | Reserved* | 43 | 44 | LED_WLAN# | 3/22 (118) |
| i2c SCL 4/23 (151) or 4/24 (152) | Reserved* | 45 | 46 | LED_WPAN# | 3/29 (125) |
| i2c SDA 4/24 (152) or 4/23 (151) | Reserved* | 47 | 48 | +1.5V | |
| Reserved* | 49 | 50 | GND | GND | |
| Reserved* | 51 | 52 | +3.3V |